Two Way Talk 2.0M Wifi Intercom Video Recording Doorbell Night Vision
Two-Way Talk Wifi Door Bell Wireless Video Door Phone Video Recording Doorbell
Description of Wifi Smart Video Doorbell
Wireless video intercom and Wireless Door Entry systems give you a great degree of flexibility over installation of a door entry system in your property,as they don't require full wiring throughout in order to operate.Utilising your wifi network,a caller at the door can be heard or seen on the receiving station in your home,and in some cases you can also use apps on your smartphone or tablet as well
Functions of WIFI Video Doorbell Camera:
1. Night vision
2. Cloud storage
3. Low Power consumption
4. 1080P Full HD
5. Real-time Video
Technical specification:
| Sensor type | 1/3" CMOS |
| Pixel | 2.0Mega |
| Min illuminance | Color 0.01Lux@F1.2
Black and White 0.001Lux@F1.2 |
| View angle | 130° |
| Shutter | 1/25~1/100,000 per second |
| IR | High power LED with ICR |
| WDR | Digtal WDR |
| Video compression standard | H.264 , H.265 |
| Video compression standard | 32Kbps~2Mbps |
| Max picture size | 1920 X 1080 |
| Frame rate | 1~25 per second |
| Audio | Full duplex audio |
| Storage | Support Micro SD card (Max. 128G),Cloud Storage |
| Image setting | Support HD/SD；support mirror |
| Reset | Support |
| Interface protocol | Private |
| Communication protocol | TCP/IP,HTTP,DHCP,DNS,RTSP |
| General function | Dual stream, password protection |
| Wifi | IEEE802.11b/g/n |
| Optional accessories | Wireless Chime |
| Triggering | Support button triggering , Motion Detection |
| Working temperature and humidity | -20℃~50℃,humidity less than 90% (without condensation) |
| Power supply | Support AC/DC 12~24V |
| Water proof | IP55 |
| Size(mm) | 116*45*27MM |
| Weight(g) | 90g |
FAQ:
Q: What should I pay attendance to when doing product testing?
A: First of all,you’d better read our manual carefully.If you do not understand the content,please consult our customer service.Our goal is to satisfy you with this transaction.Most importantly,when you connect a doorbell to a phone,you must place the phone at least five meters away from the machine and then make speak and record.This will not cause signal interference,will not produce noise.
Q: When does the product need to be reset?how to reset it?
A: It needs to be reset when the product can’t connect to the phone,There is a description on the first page of the manual,and the key step is to connect when you see the red light start flashing.
Q: In the network process,the process bar is always not 100%,add failure?
A: This camera only support 2.4GHz WiFi router,please make sure you are using a 2.4GHz WiFi router.And confirm the WiFi password again.
Q: Repeated additions are failures?
A: After adding a failure,it’s recommended to restart the device or power off,and then try to add again.
Q: The device can not be previewed properly?
A: Check whether the network is normal,you can place the doorbell close to the router,and if not,it is recommended to reset the device and add it again.
Product Tags:
|
|
Two Way Talk 2.0M Wifi Intercom Video Recording Doorbell Night Vision Images
|
